cerhu > linux.debian.user.french

Bernard Schoenacker (14/01/2019, 20h20)
bonjour,

j'ai voulou utiliser un dessin existant et
voici le résultat :

Creating configuration window
Creating configuration window
New configuration applied
File: /home/bernard/Documents/Q-cad/torche-suedoise/grille-torche-suedoise-2.dxf selected
Loading file: /home/bernard/Documents/Q-cad/torche-suedoise/grille-torche-suedoise-2.dxf
Reading DXF Structure
Reading Block *Model_Space; Nr: 0
Reading Block *Paper_Space; Nr: 1
Reading Block *D16; Nr: 2
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D4; Nr: 3
Found unsupported geometry type: SOLID !
Reading Block *D6; Nr: 4
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D2; Nr: 5
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D5; Nr: 6
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D3; Nr: 7
Found unsupported geometry type: SOLID !
Reading Block *D19; Nr: 8
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D12; Nr: 9
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D21; Nr: 10
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D23; Nr: 11
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D1; Nr: 12
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D22; Nr: 13
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D11; Nr: 14
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D20; Nr: 15
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D10; Nr: 16
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D8; Nr: 17
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D9; Nr: 18
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D7; Nr: 19
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D13; Nr: 20
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D15; Nr: 21
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D14; Nr: 22
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D18; Nr: 23
Found unsupported geometry type: SOLID !
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Reading Block *D17; Nr: 24
Found unsupported geometry type: SOLID !
Found unsupported geometry type: MTEXT !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: LEADER !
Found unsupported geometry type: LEADER !
Found unsupported geometry type: MTEXT !
Found unsupported geometry type: MTEXT !
Found unsupported geometry type: MTEXT !
Found unsupported geometry type: MTEXT !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Found unsupported geometry type: DIMENSION !
Creating Contours of Block Nr: 0
Creating Contours of Block Nr: 1
Creating Contours of Block Nr: 2
Creating Contours of Block Nr: 3
Creating Contours of Block Nr: 4
Creating Contours of Block Nr: 5
Creating Contours of Block Nr: 6
Creating Contours of Block Nr: 7
Creating Contours of Block Nr: 8
Creating Contours of Block Nr: 9
Creating Contours of Block Nr: 10
Creating Contours of Block Nr: 11
Creating Contours of Block Nr: 12
Creating Contours of Block Nr: 13
Creating Contours of Block Nr: 14
Creating Contours of Block Nr: 15
Creating Contours of Block Nr: 16
Creating Contours of Block Nr: 17
Creating Contours of Block Nr: 18
Creating Contours of Block Nr: 19
Creating Contours of Block Nr: 20
Creating Contours of Block Nr: 21
Creating Contours of Block Nr: 22
Creating Contours of Block Nr: 23
Creating Contours of Block Nr: 24
Creating Contours of Entities
Loaded layers: 5
Loaded blocks: 25
Block 0 includes 0 Geometries, reduced to 0 Contours, used layers: []
Block 1 includes 0 Geometries, reduced to 0 Contours, used layers: []
Block 2 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 3 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 4 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 5 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 6 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 7 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 8 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 9 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 10 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 11 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 12 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 13 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 14 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 15 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 16 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 17 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 18 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 19 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 20 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Block 21 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 22 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 23 includes 3 Geometries, reduced to 3 Contours, used layers: [0]
Block 24 includes 1 Geometries, reduced to 1 Contours, used layers: [0]
Loaded 483 entity geometries; reduced to 117 contours; used layers: [1, 2, 3, 4, 0]; number of inserts 0
Drawing units: millimeters
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 609, in abs_iter
raise StopIteration()
StopIteration

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "/usr/bin/dxf2gcode", line 727, in open
self.load()
File "/usr/bin/dxf2gcode", line 874, in load
self.makeShapes()
File "/usr/bin/dxf2gcode", line 922, in makeShapes
self.makeEntityShapes(self.entityRoot)
File "/usr/bin/dxf2gcode", line 996, in makeEntityShapes
tmp_shape.AnalyseAndOptimize()
File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 175, in AnalyseAndOptimize
self.setNearestStPoint(Point())
File "/usr/lib/python3/dist-packages/dxf2gcode/core/shape.py", line 191, in setNearestStPoint
key=lambda geo:
RuntimeError: generator raised StopIteration
[1] 21762 abort dxf2gcode

comment sortir de ce genre d'erreur ?

merci
slt
bernard
Hugues MORIN (15/01/2019, 19h30)
Bonsoir

Je ne suis pas specialiste mais je fais occasionnellement quelques
impression 3D

As tu essaye d'exporter ton fichier DXF en STL comme pour les imprimantes 3D
Et a l'aide de Cura ou Repetier, de le transformer en Gcode.

Il me semble que repetier a des options pour les cnc.

Sinon tu peux aussi regarder du cote de LINXCNC ([..]),
c'est une distri complete qui permet de commande directement une machine
CNC.

Cordialement
Hugues

Le lun. 14 janv. 2019 à 19:11, Bernard Schoenacker <
bernard.schoenacker> a écrit :
[..]
Bernard Schoenacker (15/01/2019, 19h40)
----- Mail original -----

> De: "Hugues MORIN" <morinh>
> À: debian-user-french
> Cc: "debian" <debian-user-french>
> Envoyé: Mardi 15 Janvier 2019 18:27:44
> Objet: Re: erreur d'interprétation dxf2gcode


> Bonsoir


> Je ne suis pas specialiste mais je fais occasionnellement quelques
> impression 3D


> As tu essaye d'exporter ton fichier DXF en STL comme pour les
> imprimantes 3D
> Et a l'aide de Cura ou Repetier, de le transformer en Gcode.


> Il me semble que repetier a des options pour les cnc.


> Sinon tu peux aussi regarder du cote de LINXCNC (
> [..] ), c'est une distri complete qui permet de
> commande directement une machine CNC.


> Cordialement
> Hugues


Hugh, grand sachem a parlé !

et moi le scarabée j'ai eu une réponse du dev de dxf2gcode qui
m'a indiqué que la version debian était obsolète ...

par conséquent je suis contraint d'attendre que la nouvelle
mouture sorte des cartons en version deb sachant que le dxf
de base fournit est correct (librecad) ....

attention, le Gcode est calé pour de la découpe laser pour
ce cas ci et non pour de l'usinage ...

merci beaucoup pour s'être penché dessus, mais pour l'instant
je suis contraint à être au "chômage technique" ...

slt
bernard
Fabien R (17/01/2019, 09h30)
On 15/01/2019 18:37, Bernard Schoenacker wrote:

> par conséquent je suis contraint d'attendre que la nouvelle
> mouture sorte des cartons en version deb sachant que le dxf
> de base fournit est correct (librecad) ....

Tu ne peux pas compiler les sources ?
Discussions similaires
Sauf erreur d'interpretation

Interpretation de la valeur d'erreur #NA

Interprétation de l'erreur quadratique

interprétation message d'erreur


Fuseau horaire GMT +2. Il est actuellement 08h58. | Privacy Policy